Semiconductor Industry Research Report: Semiconductor Manufacturing Restrictions Are Intensifying, And The Localization Of Equipment Parts Is Accelerating
1. High barriers and wide space in semiconductor equipment parts industry
1.1 What parts are needed for semiconductor equipment?
Semiconductor equipment parts are the support of the entire semiconductor equipment industry. Semiconductor equipment parts refer to the parts that meet the requirements of semiconductor equipment and technology in terms of materials, structure, process, quality, accuracy, reliability and stability. Semiconductor equipment parts are in the upstream position in the semiconductor industry chain, and the downstream includes semiconductor equipment manufacturers and wafer factories. Semiconductor equipment manufacturers will not only purchase some components with low integration, but also purchase semiconductor equipment modules and systems integrated by components for the production of semiconductor equipment; Parts purchased by global semiconductor manufacturers are usually used as consumables or spare parts.
The semiconductor equipment parts supply system has rich levels. The multi-level supply mode means that supplier A supplies to supplier B, supplier B completes the assembly parts to supplier C, and C completes the sub modules to supply the equipment supplier. For example, Fuchuang Precision supplies process parts and structural parts to TOCALO, VAT and other parts manufacturers, and Huaya Intelligent supplies high-end precision metal structural parts to Chaocolin, Ichor, Jabil and other parts manufacturers, and finally enters AMAT, Lam and other international equipment manufacturers.
According to the internal process of typical integrated circuit equipment chamber, parts can be divided into: mechanical, electrical, electromechanical, gas/liquid/vacuum system, and instrumentation.
According to the service objects of semiconductor parts, semiconductor parts can be divided into precision machining parts and general outsourcing parts. Among them, precision machining parts are usually designed by various semiconductor equipment companies and then outsourced for processing, such as process chambers, transmission chambers, etc; General outsourcing parts include silicon structure, O-ring, valve, gauge, pump, gas spray head, etc.
Among semiconductor equipment parts, mechanical parts account for the highest proportion. From the purchase proportion of equipment manufacturers, mechanical parts accounted for 27%, followed by gas/liquid/vacuum parts, accounting for 20%. From the perspective of wafer fab procurement proportion, machinery accounted for 37%, and gas/liquid/vacuum components accounted for 19%
Semiconductor equipment consists of thousands of parts. Taking the lithography machine as an example, ASML dual stage lithography machine mainly includes Wafer transmission system, system integration system, Retile transmission system, horizontal and alignment system, light source imaging system, projection lens system, etc., specifically including projection objective lens, light source, beam corrector, energy controller, mask stage, internal closed frame, shock absorber, etc.
Components of different semiconductor devices are different. Electromechanical integrated parts accounted for the highest proportion among gluing developing equipment, accounting for 33%; Among the parts required by etching equipment and deposition equipment, mechanical parts account for the highest proportion; Gas/liquid/vacuum parts account for the highest proportion in cleaning equipment; Among the components required for optical equipment such as testing equipment, optical components account for the highest proportion.
1.2 Where is the barrier of semiconductor equipment parts?
Technical barriers: compared with basic parts in other industries, semiconductor equipment parts are particularly technologically intensive, characterized by high precision, complex process and extremely demanding requirements. This is mainly due to the following three factors: first, semiconductor manufacturing is a precision manufacturing industry, and the purity of key parts in raw materials, consistency of raw material batches, quality stability, machining accuracy control Clean cleaning and other aspects of the requirements are higher, resulting in a high technical threshold. For example, as the line width of semiconductor processing becomes smaller and smaller, the photolithography process is extremely strict in controlling minimal pollutants, not only the particles, but also the metal ion precipitation of filter products.
Second, the semiconductor manufacturing process is often in a high-temperature and highly corrosive environment, and semiconductor equipment needs to operate stably for a long time. Semiconductor components need to take into account the strength, strain, corrosion resistance, electronic characteristics, material purity and other composite functional requirements. Take the electrostatic chuck as an example. First, the aluminum oxide ceramic or aluminum nitride ceramic itself is used as the main material, which needs to meet the thermal conductivity, wear resistance and hardness indicators. At the same time, other conductive materials need to be added to make its overall resistivity meet the functional requirements; Second, the internal organic processing structure of ceramics requires high precision, and the combination of ceramic layer and metal base should meet the requirements of uniformity and high strength; Third, the surface of electrostatic sucker shall reach 0.01 after surface treatment μ The coating of about m shall be resistant to high temperature and wear, and its service life shall be more than three years.
Third, the semiconductor equipment parts market is clearly subdivided, and the volume of each subdivided field is small, and the technical requirements and technical difficulties of different subdivided categories are different, so a large amount of Knowledge How needs to be accumulated.
Customer barriers: The customer barriers of semiconductor equipment parts are mainly reflected in the following two aspects: (1) The chip manufacturing process requires dozens of chemical gases mixed together, plus voltage, temperature, pressure and other parameters, so the reaction process is very complex, so once the formula is determined, it will not be easily changed. For equipment manufacturers, the supply of spare parts needs to be highly consistent, and the suppliers of spare parts will not be easily replaced. Taking CVD as an example, the chip manufacturing process requires multiple deposition processes. CVD is a technology that uses various energy sources, such as heating, plasma or light radiation, to make chemical substances in gas or steam state react on the gas phase or gas-solid interface to form solid deposits in the reactor by chemical reaction. In the chemical vapor deposition process, the change of the proportion of mixed gas, pressure, temperature and plasma excitation power will affect the deposition effect, so it is necessary to strictly control each reaction condition in the reaction process to keep consistent.
(2) The verification procedure of semiconductor parts is complex, and the cooperation of downstream customers is not high; In addition, in the process of long-term product iteration, foreign component manufacturers have formed a large number of Knowledge Hows, while domestic manufacturers are difficult to obtain verification opportunities and large-scale applications due to lack of experience and key technologies. Taking the certification of a customer of Fuchuang Precision as an example, the certification process is as follows: First, the quality system certification is required, with a cycle of about one year; Secondly, special process certification is required, including process capability certification and performance index certification. The certification cycle is about one year. After the quality system certification and special process certification are passed, they need to be reviewed regularly according to customer requirements. If they fail to pass the review, they cannot continue to supply. After passing the above two rounds of certification, the company obtained the qualification for first article trial production. The company developed the process route and manufacturing process through research and development, and the first article sample was delivered and passed the customer acceptance before it was qualified for batch production. The first article trial production and acceptance cycle are quite different, generally about half a year.
Capital and supply chain barriers: In terms of capital, compared with the semiconductor equipment industry, semiconductor equipment parts are relatively capital intensive industries. In order to meet the requirements of higher production capacity, raw materials and processing equipment of parts are required to be high and expensive. For example, precision metal manufacturers need to purchase large high-end imported equipment such as CNC laser cutting machines, welding robots and precision CNC. In terms of supply chain, processed parts often require high-purity materials, such as aluminum and quartz, which need to be specially customized by large mines. Small parts manufacturers have small purchases, poor delivery conditions, and parts and equipment manufacturers are in a passive position, which constitutes barriers to entry into the industry. From the perspective of domestic parts manufacturers, the raw materials for high-end metal parts manufacturing, such as aluminum alloy metal, tungsten molybdenum metal, and the upstream raw materials of quartz pieces, such as high-purity quartz sand, are basically monopolized by American and Japanese companies. The shortage of upstream processing equipment and raw materials has caused most semiconductor parts enterprises in China to operate at a low technological level for a long time, which cannot ensure the consistency of product quality, It affects the improvement of product quality.
1.3 How to rank the technical barriers of various parts of semiconductor equipment?
In terms of technical difficulty, optical components have the highest technical barriers. Secondly, non-metallic products are mainly supplied by foreign suppliers; The next is precision control. For example, the flowmeter is controlled by the US military industry, and domestic enterprises mainly rely on imports; The technical barriers of ordinary metal workpieces are the lowest, and the degree of localization is also high. From the perspective of certification difficulty, compared with precision machined parts, general purchased parts have strong universality and consistency, and the certification of equipment and manufacturing lines is more difficult.
The technical difficulty of semiconductor equipment parts has a certain correlation with the delivery cycle. The optical parts with the highest technical barriers have the longest delivery time, which requires more than one year; Secondly, non-metallic workpieces. The delivery cycle of engineering plastics needs more than one year, and the quartz oscillator also needs 9-10 months; The technical barriers of precision control parts are also high, and the delivery cycle of precision ball screws is more than one year.
Gross profit margin is related to product technical barriers. Due to the different technical difficulties of each sub category of semiconductor parts, the gross profit margin is different. In terms of different categories, optical components have the highest technical barriers and the highest gross profit margin; Secondly, flowmeter with high accuracy and electrical products; The technical barrier of mechanical parts is low, and the gross profit rate is relatively low, but the non-metallic mechanical products are difficult to process, and the technical barrier is also high. In addition, module products have low gross profit margin due to the large cost of purchased parts.
1.4 How to understand the development of semiconductor equipment parts manufacturers in multiple production lines and fields?
The semiconductor equipment parts market is small and sophisticated, with obvious fragmentation characteristics. Compared with the semiconductor equipment market, the semiconductor parts market is more subdivided. According to the data obtained from the survey of domestic mainstream manufacturers, at present, there are more than 2000 kinds of parts (including maintenance replacement and failure replacement parts) used in the daily operation of the whole year.
In the semiconductor industry, the bullwhip effect is obvious, and component manufacturers develop in many fields to avoid risks. The small changes in the final consumer market, after one level of amplification effect, will be released to the upstream manufacturers greatly. This phenomenon is called "bullwhip effect" in the supply chain management. For example, if the demand for computers increases by 2%, it may be scaled up to 10% when it comes to processors, 20% when it comes to equipment manufacturers, and more than 30% when it comes to component manufacturers. As a result of the bullwhip effect, semiconductor component manufacturers have expanded the development of medical equipment, communication equipment and other industries at the same time, which objectively dispersed the risks brought about by cyclical changes in the industry.
Domestic manufacturers such as Yingjie Electric focus on power control systems, providing excellent power control and other automatic control equipment for photovoltaic, LED new light sources, nuclear power, glass fiber, metallurgy, petrochemical and other industries; ShinlaiYingcai is located in pan semiconductor, biomedicine, food safety and other fields.
Semiconductor equipment parts manufacturers have developed in multiple production lines and fields. Due to the small market space and high technical threshold of a single product of semiconductor equipment parts, the international leading semiconductor parts enterprises usually focus on the development strategy of cross industry and multiple product lines. For example, MKS occupies its main market share in gas pressure gauge/reactor, RF/DC power supply, vacuum products and other product lines. In addition to the application in the semiconductor industry, it is also widely used in industrial manufacturing, life and health sciences and other fields.
Extension M&A is the main means for the international leading semiconductor parts enterprises to grow in scale. As there are many semiconductor subdivisions, advanced technologies can be quickly absorbed through mergers and acquisitions to expand the business scope. For example, since the acquisition of Sieger Engineering in 2006, Chaocolin has started its vertical integration plan. Acquired AIT in 2012 to expand its ability in subsystem assembly; The acquisition of Marchi and Miconex in 2012 expanded the company's capabilities in thermal solutions, precision processing and plastic integration; The acquisition of QGT in 2018 enriched the company's ability to clean and coat parts; In 2019, the company strengthened its strength in semiconductor weldments by acquiring DMS; In 2021, Ham Let will be acquired to improve the company's ultra-high purity and industrial flow control system.
1.5 How do domestic manufacturers enter the field of semiconductor equipment parts?
There are three main ways for domestic manufacturers to enter the field of parts: (1) Relying on the original technology platform to expand: for example, in the early days of its establishment, Yingjie Electric's main product was power controller. Later, on the basis of the power control core technology platform, it successively introduced special power control power supplies for different industries, and then launched special power supplies through technology tracking research and development. Relying on the original target business, Jiangfeng Electronics has accumulated rich manufacturing experience and technical reserves in metal material characteristics and processing, and has a relatively mature management system and cultural system. It can ensure the consistency of product quality according to the requirements of the semiconductor industry, and expand the semiconductor equipment parts business on this basis. (2) Upstream and downstream extension: There are two main ways of upstream and downstream expansion. One is to expand from semiconductor materials to semiconductor parts. For example, since the establishment of Shenggong Co., Ltd., its main product is large diameter silicon materials, and gradually expand to its downstream silicon parts for plasma etchers; The second is to expand within the parts supply chain system, such as Toro Technology, which started with high-power semiconductor lasers. After the acquisition of LIMO, it has the ability to control photon technology and expand the application solutions of photon technology. (3) Acquisition of overseas parts manufacturers: Through the acquisition of Compare Systems, Wanye has acquired the supply capacity of parts and components in the field of flow control system and entered the supply chain system of overseas leading equipment manufacturers.
Taking Juguang Technology as an example, the company expanded its business scope through mergers and acquisitions and downstream integration. Torch Light Technology started from the high-power semiconductor laser that "generates photons". After the acquisition of LIMO in 2017, Torch Light Technology has the technical ability to "regulate photons". Combining the ability to generate photons and regulate photons, Torch Light Technology expands the application solutions of photon technology to the downstream through strategic integration. According to the disclosure of Torino Technology, the company plans to acquire COWINDST, a global leading provider of display panel repair equipment, mask (mask) repair equipment and pan semiconductor optical detection equipment, to further improve its ability to provide complete systems and overall solutions for specific applications.
1.6 How to understand the competition pattern of semiconductor equipment parts?
The overall competition pattern of semiconductor equipment parts is scattered. There are many categories of semiconductor parts and components, and there are differences and technical barriers between each segment. Most semiconductor equipment parts and components manufacturers focus on specific processes or products, showing the characteristics of "small and refined". Therefore, in general, the competition pattern of the entire semiconductor parts industry is relatively scattered. According to VLSI Research data, the market share of the top ten suppliers is about 50%. The market competition pattern of semiconductor equipment parts has a centralized trend, and the market share of the top ten manufacturers has increased. On the one hand, around 2000, due to the declining prosperity of the industry, the equipment factory eliminated inefficient and small suppliers in the procurement, concentrated on the amount of procurement, and achieved economies of scale; On the other hand, component manufacturers are also constantly merging and integrating to expand their business, so the market concentration is constantly improving.
The market concentration of semiconductor equipment parts segment is high, and it is mainly monopolized by foreign manufacturers. Due to the strict requirements for precision and stability of semiconductor parts, especially in areas with high technical difficulties, the barriers to entry are very high, and only a few enterprises in the world can supply them. Therefore, from the perspective of subdivision, the monopoly effect is relatively obvious. For example, the main market of global vacuum pump is dominated by European and Japanese enterprises. Before 2019, the three companies will occupy 88% of the global market share, with a high degree of industry concentration. In the field of electrostatic sucker, the semiconductor enterprises in the United States and Japan basically dominate, accounting for more than 95% of the market share, mainly including AMAT, LAM, Shinko, TOTO, NTK, etc. In the semiconductor manipulator market, it is mainly occupied by the Japanese market. Brooks Automation, RORZE and DAIHEN, the top three enterprises, occupy about 55% of the market share.
From the perspective of subdivided fields, the market concentration of semiconductor vacuum valves is also increasing, mainly for two reasons: from the perspective of supply chain management, equipment manufacturers tend to choose large factories with rich production lines and complete products. VAT has a wide range of valve product portfolio, including about 140 valve series, 8000+customized products and 2500+standard products. From the perspective of parts themselves, semiconductor parts have high barriers to entry. VAT is a world leading vacuum valve supplier with obvious technical advantages. It cooperates with customers in research and development, and has more than 100 basic technical patents for vacuum valves. And VAT is also expanding its production capacity and establishing production centers around the world; And continue to expand to adjacent businesses.
2. The rise of domestic equipment manufacturers accelerates the localization of parts
2.1 Emerging technologies promote the increase of semiconductor consumption, and the demand for equipment parts continues to increase
Emerging fields have driven the rapid expansion of the semiconductor industry. Driven by strong demand in emerging application fields such as 5G, Internet of Things, smart cars, cloud computing, big data, medical electronics and security electronics, semiconductor demand is optimistic in the medium and long term. According to WSTS statistics and forecasts, the global semiconductor market size will be 555.9 billion US dollars in 2021, and it is expected to reach 679.7 billion US dollars by 2023.
The rapid growth of the global semiconductor equipment industry has driven the demand for semiconductor equipment parts to increase. The scale of the global semiconductor equipment market is highly related to the scale of the semiconductor market. In recent years, the scale of the global semiconductor equipment market has gradually expanded. In 2021, the scale of the global semiconductor equipment market will reach US $102.6 billion. Thanks to the vigorous development of the whole semiconductor industry in China and the continuous policy support of the state for the semiconductor industry in recent years, the scale of the semiconductor equipment market in Chinese Mainland has grown rapidly, with a market size of US $29.6 billion in 2021, becoming the world's largest semiconductor equipment market. Semiconductor equipment parts account for about 50% of the semiconductor equipment market. With the growth of the semiconductor equipment market, it will drive the rapid expansion of the semiconductor equipment parts market.
Market space measurement of semiconductor equipment parts: downstream market semiconductor equipment manufacturers
The global semiconductor equipment parts market mainly consists of two parts: first, parts customized by or purchased by global semiconductor equipment manufacturers. Second, the parts directly purchased by global semiconductor manufacturers as consumables or spare parts.
Semiconductor equipment market space: According to Wind data, the global semiconductor equipment market size will be 102.6 billion dollars in 2021; The scale of China's semiconductor equipment market is $29.6 billion, and the cost rate of equipment manufacturers: the top five semiconductor equipment manufacturers in the world account for more than 75% of the global equipment market. The gross margin of the top five manufacturers is 46~62%. We assume that the average gross margin of equipment manufacturers is 50%, that is, the cost rate of equipment manufacturers is 50%. Proportion of direct material cost of equipment manufacturers: the proportion of direct materials of domestic leading equipment manufacturers is about 90%, assuming that the value is 90%.
2.2 The wafer factory continues to expand production, driving the demand for replacement of equipment parts
The maintenance and replacement of parts during the daily operation of the wafer factory and the expansion of the production line will further expand the parts market. At present, global wafer fabs continue to expand production. SEMI predicts that from 2019 to 2024, the industry will add at least 38 new 12 inch wafer fabs with mass production, and the monthly capacity of 12 inch wafer fabs will increase by about 1.8 million pieces, reaching more than 7 million pieces. IC Insights estimates that the total sales of the wafer manufacturing market will reach 107.2 billion dollars in 2021, and will continue to grow at an average annual growth rate of 11.6%. It is expected to reach 151.2 billion dollars in 2025.
China's wafer manufacturing capacity is expanding rapidly, and it is expected that domestic demand for semiconductor parts will continue to be strong. At present, wafer production capacity is transferred to the mainland. Cabot microelectronics expects that Chinese Mainland will increase to 40% of the global semiconductor manufacturing capacity by 2030. China has been the largest IC consumer since 2005, but in 2021, China's IC output value will only account for 16.7% of the market. There is still a large gap. It is expected that the domestic capacity will accelerate expansion in the future. IC Insights predicts that the ratio of domestic output value to its market will reach 21.2% in 2026. According to xinmou data, in 2020, the purchase amount of parts and components for front-end equipment of 8-inch and 12 inch wafer lines in Chinese Mainland exceeded US $1 billion. With the expansion of domestic wafer production capacity, the purchase amount of parts and components will further increase.
Market space measurement of semiconductor equipment parts: downstream market - wafer factory
According to xinmou data, the purchase amount of front-end equipment parts for 8-inch and 12 inch wafer lines in Chinese Mainland exceeded US $1 billion in 2020. According to IC Insights data, China's wafer output value in 2020 and 2021 will be US $24.2 billion and US $31.2 billion respectively. In 2021, China's chip manufacturing output value will account for 16.7% of the world's total. According to the calculation of wafer output value, the procurement of parts for wafer factories in Chinese Mainland will be about 1.3 billion US dollars in 2021, and the procurement of parts for global wafer factories will be about 7.8 billion US dollars. Furthermore, considering the procurement demand for high value-added components brought by advanced processes, the global procurement amount of wafer line components is expected to be 10 billion dollars.
Combined with the parts market space of 46.2 billion US dollars (global) and 13.3 billion US dollars (domestic) from equipment manufacturers estimated in the previous section, the market size of semiconductor equipment parts is the sum of the two downstream market sizes. In general, the global market size of semiconductor equipment parts is about 56.2 billion US dollars in 2021, and the market size of conductor equipment parts in Chinese Mainland is about 14.6 billion US dollars.
Market size of semiconductor equipment parts by category: from the perspective of segmentation, the market space of mechanical parts is the largest. The global market size is expected to be 15.3 billion dollars in 2021, followed by gas/liquid/vacuum systems. The global market size is expected to be 11.5 billion dollars in 2021.
2.3 The rise of domestic equipment manufacturers promotes the localization process of semiconductor parts
There is a broad space for the localization of semiconductor equipment parts. Despite the rapid growth of the domestic semiconductor parts market, the technical capacity, process level, product accuracy and reliability of domestic parts enterprises cannot meet the needs of domestic equipment and wafer manufacturers for the time being, and the overall localization rate is still at a low level. From the perspective of subdivided fields, the localization rate of quartz, sprinkler head, edge ring and other parts and components is only more than 10%, the localization rate of radio frequency generator, MFC and other parts and components is 1% - 5%, while the localization rate of valves, electrostatic chucks, measuring instruments and other parts and components is less than 1%, so there is a large room for domestic substitution.
The supply of global parts has become a bottleneck, and domestic semiconductor manufacturers have actively introduced domestic parts. With the sharp increase in demand for semiconductor equipment and the tight supply of global parts, the delivery time of core parts has been extended from the usual 2-3 months to more than 6 months. The delivery time of advanced parts in the United States, Japan, Germany and other countries has also increased significantly, and some advanced parts, such as power line communication systems, have been delayed for more than 12 months. However, domestic equipment manufacturers do not give priority to supply in the supply chain of international semiconductor parts manufacturers. In consideration of supply chain security, cost and other factors, domestic equipment manufacturers are actively cooperating with domestic parts manufacturers to verify and establish a domestic independent supply chain system.
3. Domestic semiconductor equipment parts manufacturers grow rapidly
The major semiconductor parts manufacturers in China are concentrated in the field of mechanical parts. At present, the major domestic machinery parts manufacturers include Fuchuang Precision, Jiangfeng Electronics, Shengong Co., Ltd., Huaya Intelligent, and Huazhuo Precision; Among them, Fuchuang Precision's business covers process parts, structural parts, module products and gas pipeline products; Jiangfeng Electronics focuses on process parts; The main parts and components of Shengong are silicon components; The main products of Huaya Intelligent are customized precision metal structures; Huazhuo Jingke focuses on precision motion system. Yingjie Electric mainly focuses on power products in the semiconductor field; The vacuum products of Hanzhong Precision Machinery are applied in the fields of semiconductor and photovoltaic. In addition to the above local enterprises, there are also enterprises that plan the parts market through the acquisition of overseas companies, and Wanye enterprises enter the field of flow control through the acquisition of Compare System; ShinlaiYingcai expanded the field of high-end vacuum chambers and vacuum valves through the acquisition of GNB; Juguang Technology expanded its laser optical business by acquiring LIMO, and recently announced that it plans to acquire COWINDST to further improve the pan semiconductor industry chain.
Differentiated competition among domestic machinery parts manufacturers. The domestic parts manufacturers are mainly concentrated in the mechanical field, among which, Shengong Co., Ltd. focuses on silicon parts; Huaya Intelligent provides customized precision metal structure products for leading high-end equipment manufacturers at home and abroad; Huazhuo Jingke mainly provides ultra precision measurement and control equipment components. Both Fuchuang Precision and Jiangfeng Electronics focus on metal parts. Fuchuang Precision is actively expanding its gas pipeline products and product lines; Jiangfeng Electronics uses the common market of target materials and parts to promote the layout of parts.
Parts with low technical barriers have been partially localized, and the localization rate of high-end products is very low. From the current domestic market, mechanical parts with low technical barriers have achieved a relatively high localization rate, and high-end products such as electrostatic chucks have a low degree of localization. Among the electrical products, Yingjie Electric programmable DC power supply and Beiguang Science and Technology's RF power supply are applied to a small number of domestic semiconductor manufacturers. Gas/liquid/vacuum products, with medium localization rate. In areas with high technical barriers, precision control parts such as Wanye acquired company to enter the international supply chain, and optical field homogenizers such as Toro Technology entered the core supplier of ASML.
Based on local advantages and cost advantages, domestic component manufacturers have broad prospects for development. For the production lines of domestic equipment manufacturers and overseas companies in mainland China, on the one hand, because the domestic parts manufacturers are close to the terminal market, it is easy to repair parts, and the delivery cycle is easy to control; On the other hand, due to factors such as freight cost and tariff, the cost of domestic parts manufacturers has certain advantages. With the technical progress of domestic manufacturers and the improvement of production line richness, they are expected to further cut into the domestic production line supply chain. In addition, some domestic companies have successfully entered the overseas equipment supply system by acquiring overseas component manufacturers.
The leading domestic parts manufacturers have entered the domestic customer supply chain. Before large-scale sales of semiconductor parts, they need to go through strict and complex verification procedures, and they need to cooperate fully with downstream equipment and manufacturers. With the increasingly prominent supply chain security issues and the progress of domestic parts manufacturing technology, some semiconductor equipment parts manufacturers have entered the domestic supply chain, for example, Fuchuang precision products have entered mainstream domestic semiconductor equipment manufacturers, including North Huachuang, Yitang, Zhongwei, Tuojing Technology, Huahai Qingke, Xinyuan Micro, Zhongkexin Equipment, Keystone, etc.
Some domestic parts manufacturers entered the international supply chain and were recognized by overseas customers. Domestic Fuchuang Precision and Xinlai Yingcai have directly entered the international leading equipment manufacturers; Huaya Intelligent has also entered the international supply chain, with indirect customers including AMAT, Lam and other manufacturers; Hanzhong Precision Machinery entered the international advanced wafer factory; Wanye Enterprise and Juguang Technology entered the international leading customer supply chain system by acquiring overseas companies.
Domestic semiconductor equipment parts manufacturers have grown rapidly. From the perspective of product coverage of domestic manufacturers, Fuchuang has the richest product line, including process parts, structural parts, module products and gas pipelines, accounting for 49% of the semiconductor equipment parts market. Other manufacturers have relatively single product coverage, focusing on one or two fields. From 2019 to 2021, the operating income of major domestic manufacturers' spare parts showed a growth trend, and a slight decline in 2020 was mainly affected by the industrial situation. From the perspective of the revenue related to semiconductor equipment parts in 2021, Compart (held by Wanye Enterprises) has the largest scale, with a revenue of 920 million yuan and a revenue of 830 million yuan for Fuchuang Precision.
There is an obvious gap between the profitability of domestic semiconductor parts manufacturers and that of overseas manufacturers, but the overall trend is to increase. Due to the development of many production lines and fields of semiconductor equipment parts manufacturers, the product composition of each manufacturer is different, and the comparability of gross margins among manufacturers is low. Both Hana and Shengong focus on silicon parts. By comparing their gross profit margin, Hana's gross profit margin is stable at more than 35%, while Shengong's gross profit margin is less than 20%, which is a big gap, mainly because (1) domestic manufacturers are smaller than overseas manufacturers; (2) There is still a certain gap between domestic manufacturers and overseas manufacturers in terms of technical level and yield. On the whole, the gross profit margin of domestic manufacturers shows an upward trend. With the appearance of scale effect and the continuous improvement of technical level, the profitability is expected to further improve.






