Baoji Magotan Nonferrous Metals Co.,Ltd

Determination of size and allowable deviation

    The tungsten material used in the ion implanter needs to be processed into corresponding parts in the follow-up, so the indicators such as the size and allowable deviation of the tungsten material will directly affect the material utilization rate and processing efficiency of the subsequent machined products.

    To ensure the utilization rate of materials, the size and allowable deviation of tungsten materials are specified in combination with the specific requirements of major customers and the actual level of the industry.

1. Polished tungsten plate for ion implanter

The thickness, width, length, and allowable deviation of the tungsten plate used in the ion implanter shall meet the requirements in Table 1. When the allowable deviation level is not specified in the contract, it shall be supplied according to the level II deviation.

Table 1 Dimension specification and allowable deviation of tungsten plate for ion implantation machine

Item

specification

I degree

II degree

Thickness/mm

> 1~26

±0.025

±0.05

width/mm

> 1~150

±0.025

±0.10

Length/mm

> 1~150

±0.025

±0.10

> 150~300

±0.50

±1.00

 2. Polished tungsten rod for ion implanter

The diameter, length, and allowable deviation of the polished tungsten rod used in the ion implanter shall meet the requirements in Table 2. When the allowable deviation level is not specified in the contract, it shall be supplied according to the level II deviation.

Table 2 Dimension specification and allowable deviation of tungsten rod for ion implantation machine

Item

specification

I degree

II degree

Diameter

/mm

> 1~26

±0.025

±0.05

 Length/mm

> 1~150

±0.05

±0.10

> 150~300

±0.50

±1.00

 


You Might Also Like

Send Inquiry