Crucible Liner Moly Ready To Ship
Crucible Liner Moly
1) Sintered crucible liner Moly is mainly to mix molybdenum powder evenly in the mold, die-casting by isostatic pressing process, then sintered at high temperature, and then machined to polish the outer and inner surfaces of the molybdenum tube. For the production of large crucible liner Moly.
2) The stamped crucible liner Moly is made of high-quality molybdenum plates. A set of precision molds is required before production. The height of the crucible can be divided into single stamping and multiple stamping. The molybdenum crucible of this process has superior performance and cost. Moderate, it is also the most widely used molybdenum crucible manufacturing method in the industry.
3) Welding crucible liner Moly is rolling a molybdenum plate into a tube shape and then welding it. After welding, roundness correction treatment is performed, and then a molybdenum circular plate is welded at one end of the molybdenum tube. The molybdenum crucible of this process is compared with other processes. The pot has low cost, large dimensional tolerance, and poor performance, and is mainly used for the production of thin-walled crucibles liner Moly.
4) Machining the crucible liner Moly mainly uses a flat drill bit to drill high-quality molybdenum rods through a drilling machine, and finally produces a molybdenum crucible. This method wastes a lot of molybdenum materials, so the cost is also relatively high. However, the cost of this process is relatively high. Molybdenum tubes have better mechanical properties, mainly producing medium and small molybdenum crucibles.
