Products

Home / Products/ Tungsten Alloy Electrode / Resistance Welding Electrode

Molybdenum Welding Electrodes

The main component of the Molybdenum welding electrodes is molybdenum, which is obtained by the powder metallurgy process. The international common Molybdenum welding electrodes composition content is 99.95%, and the density is greater than 10.15g/cm3 to ensure the quality of the glass and the service life of the electrode. Commonly used molybdenum electrodes have a diameter from 20mm to 152.4mm, and a single length can reach 1500mm.

Send Inquiry

Product Introduction

Description Molybdenum welding electrodes

The balance pressure formed by the molybdenum electrode, after forging, sintering in the intermediate frequency furnace, and then rotating, rolling, planning, and milling are of various types. It is used as an electric heating glass fiber kiln equipment. Used in the glass industry. It can exist in a glass solution at 1300 degrees Celsius and has a long life. Also used in the rare earth industry.

We have been making molybdenum electrodes for nearly 20 years, and have always been committed to improving the performance of molybdenum electrodes to make them have excellent characteristics of high strength, high-temperature resistance, long life, good corrosion resistance, and not easy to oxidize and stain glass. These high-purity molybdenum electrodes have been widely used. Used in many fields, such as daily glass, optical glass, thermal insulation material, and glass fiber, and received a good reputation.

Molybdenum electrode bolts

Appearance: silver-gray metallic luster grade: MD1.

Chemical Composition: Molybdenum >= 99.9%, Impurities <= 0.10%

Extreme Physical Properties: Density >= 9.5g/cm3

Structure: molybdenum bolt, molybdenum and molybdenum electrodes form a nut plate

Properties: Good heat resistance at high temperature

Main application: Molybdenum welding electrodes is used as electric heating glass fiber furnace equipment. Mainly used in glass and rare earth industries

Product Specifications: Molybdenum welding electrodes are available for various needs.

Molybdenum electrode plates

Molybdenum electrode plate

The molybdenum electrode plate is dark brown, if washed with alkali, it will be silver-gray metallic luster (produced according to the user's requirements)

Molybdenum electrode plate purity : Mo> 99.95%

Molybdenum electrode plate density >10.15g/m³

Molybdenum electrode plate size: (3 - 25) * (50 -500) * length < 800 mm (unit weight does not exceed 40 kg) special specifications, should be negotiated by both parties

The main application of molybdenum electrode plate: Molybdenum welding electrodes can be used for heating glass fiber furnaces, liquid flow hole panels, and other equipment.

Impurity content conforms to GB3876-83 standard

Molybdenum electrode rods

The appearance of molybdenum electrode rod: bright silver-gray metallic luster. (The process is based on the user's drawings, and the surface finish is high)

Molybdenum electrode rod purity : Mo> 99.93%

Molybdenum electrode rod density: > 10.15g/cm³

Molybdenum electrode rod unit weight: 70kgs under various molybdenum electrode sizes, especially negotiated by both parties.

Molybdenum electrode rod size: production according to user needs: (φ20 - φ100) * length (mm)

Main applications of molybdenum electrode rods: Molybdenum welding electrodes are mainly used for furnaces, glass kilns for electrical stimulation electrodes, etc.

Impurity content

The impurity content is consistent with the standard of GB/t17792-1999.

Description	Grade	Density g/cm3	Finished size（mm）
Molybdenum electrode rods	Mo-4.2	9.3	14 x 20 x (400-520) 17 x 17 x (400-520) 20 x 20 x (530-540)
Molybdenum electrode coating	BMo-4.2	9.9	(60-160) x (160-500) x (3-7)
Molybdenum electrode bolts	LGM	9.9	Dia(6-36) x (30-60)